ハマー（HUMMER）H1 アルファ | Hummer H1 Alpha

2020年12月31日2022年12月3日ハマー (HUMMER)4WD・AWD

Warning: filemtime(): stat failed for /home/nanameuemuki/totsugeki.com/public_html/ac/wp-content/custom/mods/cars/6340/6340_1.jpg in /home/nanameuemuki/totsugeki.com/public_html/ac/wp-content/themes/luxech/single-cars.php on line 389

【概要】

ハンヴィーを生産していたAMゼネラルから「ハマー」の名で発売された民生版ハンヴィー。1992年6月に限定版として工場直販にて発売が始まり、1992年10月より一般ディーラーにて販売開始された。1994年モデルより搭載されているディーゼルエンジンの排気量が6.2Lから6.5Lに変更された。1995年モデルから5.7Lガソリンエンジンモデルが追加され、その後2年間生産された。1996年モデルにターボディーゼルエンジンが追加された。
1999年に販売権を得たゼネラルモーターズにより、同車はAMゼネラルが製造した上で「ハマー・H1」と改名されて販売が続けられた。2005年モデルからいすゞ製8GF1型ディーゼルエンジンに変更され、名称も「H1アルファ」となる。H1のエンジンは、ディーゼル、ガソリン共にすべてV型8気筒である。

ベース車両

ベースエンジン

性能・スペック

Mod情報

The "Alpha" was an extensively re-engineered H1 that was equipped with GM's Duramax Diesel and 5-speed Allison transmission. The previous turbo-diesel engine suffered from sluggish sales; lack of power was one of the reasons for customer resistance. In 2002, AM General CEO Jim Armour took the idea of repowering the H1 to Bob Lutz and the GM Luxury Vehicle committee. GM soon approved the use of their Duramax/Allison powertrain for the H1. This would support the continuation of the H1; it would also represent an updating in terms of power, torque, refinement and the ability to meet 2004 heavy duty EPA emissions requirements.
The update program commenced in late 2002 with production launch slated to be fall of 2004. The engineering team chose the engine variant out of the GMT560 truck (the C4500) because it packaged better into the H1 engine bay; however, 23 engine component changes were required and the team had to do a 2.0 in (51 mm) body lift to accommodate the taller engine and its turbo housing (a prior 0.5 in (13 mm) lift had been done for MY96 to accommodate the turbo on the 6.5L engine). The 8th digit of the VIN number is 3, setting this version of the 6.6L Duramax apart from the versions used in pickup trucks. The GMT560 engine calibration was used with minimal modification; engine output was 300 hp (220 kW) and 520 lb⋅ft (705 N⋅m) of torque. The Duramax engine was equipped with cooled exhaust gas recirculation and an internal engine oil cooler, thus, requiring a 40 percent heat rejection increase to engine coolant. Because space was limited between the air-lift brackets that protrude from the hood, the fan system was modified by putting it directly under the coolpack and driving it through a special gearbox directly off the crankshaft damper pulley. Several other cooling system modifications were required to assist with cold starting from −30 °F (−34 °C).
Other major modifications included the use of special high-strength steel in the chassis frame, a more powerful steering gear; quieter axle differentials, redesign of the geared hubs to use quieter helical gears, new induction, exhaust and electrical power systems; and re-engineering of the fuel supply and filtration system.
The Duramax engine delivered more torque at lower engine speeds than the 6.5L, combined with a lower gearing ratio (about 44.5 to 1 in low lock) made the vehicle more powerful. Other changes included centralized tire inflation and a new interior.
Production launch was early in 2005, and continued until production ceased in mid-2006. All vehicles built during this time are classified as model year 2006 (10th digit in VIN is a 6.)
The program was cancelled May 12, 2006 because GM decided to withdraw technical and financial support for future engineering and recertification.

Modダウンロード

1. このページはリンクフリーです。ご自身のウェブサイトやYouTube、SNS等から、自由にリンクして頂いてかまいません。
   (This page is link free. There is no problem if you link freely from your own homepage, YouTube, SNS, etc.)
2. このページにリンクして頂いたYouTube動画で、コンテンツの関連性が高いものは、本ページ上に掲載させて頂く場合があります。
   (YouTube videos linked to this page may be featured on this page if the content is highly relevant.)
3. 本ページ内容に関連して役に立ちそうな情報であれば、どんな情報でも大歓迎です。お気軽にページ下部のコメント欄から情報やご意見をお寄せください。
   (Any information that may be useful in relation to the content of this page is welcome. Please feel free to share your information and ideas in the comments section at the bottom of the page.)
4. 「ダウンロード」のリンク先が無くなっている場合も、ページ下部のコメント欄から報告して下さい。
   (If the "Download" link is missing, please let us know in the comments section at the bottom of the page.)
5. また、MODダウンロード先の情報提供や、掲載させて頂ける自作したMOD情報などあれば、お問い合わせからお気軽にご連絡下さい。
   (Also, if you have information on where to download mods, or information on your own mods that you can post, please feel free to contact us from here.)